|Academic Profile |
| || |
Assoc Prof Alfred Tok Iing Yoong
Associate Professor, School of Materials Science & Engineering
Phone: +65 67904935
Office: ABN B2C 17
|Alfred Tok leads the Nanomaterials Group that focuses on the synthesis, processing, consolidation and applications of nanomaterials (rare earth, carbon-based, functional ceramic nanoparticles). His current research is broadly based on 3 areas: carbon-based sensors, synthesis of nanostructured materials and hard & tough materials.|
|1) Carbon-based Field-Effect Transistor Sensors
The biosensors market, which is currently at USD 9.9 billion, is expected to reach USD 18.9 billion in 2019 (GIA Report, 2014) propelled by the growing population and health issues. Our group capitalizes on this emergent market and researches on disposable and low-cost sensor suitable for real-time sensing in field conditions. Our group focuses on sensors for biological and gas detection applications.
2) Synthesis of Nanostructured Materials using Atomic Layer Deposition (ALD)
Atomic layer deposition (ALD) has evolved to be a unique tool for nanotechnology with atomic level control of the depositions, 3D conformity and homogeneity. Film depositions can be realized for complex non-planar topographies for a wide range of applications such as energy conversion and storage, nanoparticle catalysts, nanostructures for drug delivery, gas separations, sensing, and photonic applications. Our group focuses on ALD materials for solar cell, hydrogen generation and smart window applications.
3) Hard & Tough Materials for Ballistic Protection Application
The next generation of military vehicular and soldier system requires light-weight materials with high strength-to-weight ratio. Our research focuses on the synthesis and densification of nanostructured materials & desired composite architecture to significantly raise the ballistic protection capability. The B-C-N-O group of compounds are potential candidates to form novel materials for ballistic protection application as they inherent the unique properties from both boron nitride and boron carbide which are known for their light weight, high hardness, low friction coefficient and high wear resistance. Prof Tok leads a team of collaborators in armour material research ranging from high temperature synthesis of novel superhard materials and consolidation by state-of-the-art Spark Plasma Sintering to advanced characterisation techniques such as depth of penetration test using Two-Stage Light-Gas Gun.
4) Institute for Sports Research
Our group is involved in the Institute for Sports Research, working on the damping property of midsoles which is based on carbon nanotube (CNT). CNT’s high aspect ratios (length/diameter) is particularly desirable for mechanical reinforcement, and it is found that the vertical aligned (VA)CNTs perform well in damping, to dissipate the energy absorbed under compression (Figure 7). Our present job is to tune the damping property of VACNT by adjusting the length, diameter and area density etc. parameters and try to reinforce the polymer with VACNT to fabricate midsole material with better cushion property.
In accordance with the objectives of the Energy Thrust Program of the NRF-CREATE Project, our group is focused on the design and synthesis of highly functional nanomaterials, which enables energy harvesting and conservation. Recently, novel graphene oxide synthesized nanoballs and nanoflowers were synthesized. These exhibit potentials for supercapacitors and energy applications. In general, these activities results in above 50 publications, 17 patent applications and projects discussions with companies regarding commercialization possibilities.
- Advanced Materials - Functionally Graded Nano Layers Material Systems
- Advanced Materials Processing For Super Hard Coatings
- Atomic Layer Deposition of High-Entropy Alloy 2D and 3D Coatings for Multifunctional Applications
- Calcomp (Coating of mechanical component use inside hard disk assembly/Development of exchange coupled nanocomposites magnet for VCM assembly)
- Composite Reporter-Based Lateral Flow Immunoassay for Detection of Substance Abuse in Athletes
- Development of Feather-light shock absorber with carbon nanomattress for footwear
- Electrochromic Photonic Crystal Smart-Window Technology
- Functionally Gradient Nanostructures for Ballistic Projection
- Functionally graded nano layers material systems - phase 2
- Institute for Sport Research
- Materials Research for Wind Turbine Applications
- Rare-earth materials for sub-45nm nano-electronic devices
- SMG Innovation Centre@ISR
- Sub-Project 3 - Development of Boron Carbide-Based Armour Tiles
- Sub-Project 4 - Smart Materials for Ballistic Protection
- Synthesis of Boron Carbide Nano-Particles for Body Armour Applications
- D.W.H. Fam & A.I.Y. Tok. (2009). Mono-distributed Carbon Nanotube Channel in Field Effect Transistors (FETs) using Electrostatic Atomization Deposition. Journal of Colloid and Interface Science, .
« Back to Category Write-up