|Academic Profile |
| || |
Assoc Prof Chan Pak Kwong
Associate Professor, School of Electrical & Electronic Engineering
Phone: +65 67904513
Office: S1 B1B 45
|Dr. P.K. Chan received the B.Sc. (Hons) degree from the University of Essex, U.K., in 1987, the M.Sc. degree from the University of Manchester, Institute of Science and Technology (U.M.I.S.T.), U.K., in 1988, and the PhD degree from the University of Plymouth, U.K. in 1992. From 1989 to 1992, he was a Research Assistant with the University of Plymouth, working in the area of MOS continuous-time filters. In 1993, he joined the Institute of Microelectronics (IME) as a Member Technical Staff, where he designed high-performance analog/mixed-signal circuits for integrated systems and CMOS sensor interfaces for industrial applications. In 1996, He was a Staff Engineer with Motorola, Singapore where he developed the magnetic write channel for Motorola 1st generation hard-disk preamplifier. He joined Nanyang Technological University (NTU), Singapore in 1997, where he is an Associate Professor in the School of Electrical and Electronic Engineering. He served the Program Director (analog/mixed-signal IC and applications) for the Center for Integrated Circuits and Systems (CICS) from 2003 to 2010. He conducted numerous IC design short courses to the industry and design centers. He has served as a Guest Editor for Journal of Circuits, Systems and Computers on 2011 and 2012 Special Issues and for Sensors on 2016 Special Issue: "Smart Interface Circuits & Systems". He is a member of Analog Signal Processing Technical Committee (IEEE CAS Society).|
|Dr Chan’s research interests are in areas of mixed-mode circuits and systems, precision analog circuit design, integrated circuit analysis and circuit theory & applications. He initiated SENSOR CIRCUITS & SYSTEMS research, focusing on
• Sensor interface ICs for biomedical, chemical, environmental and nanotechnology based sensors;
• Sensor systems based on highly-accurate instrumentation circuits or intelligent design techniques;
• Ultra low-voltage low-power low-noise circuit design techniques;
• Power management ICs for integrated sensors and system-on-chip;
• PVT-Insensitive circuits and systems
- Media Tek's Advanced Technology IC Shuttle Programme
- Sub-project 2 - ASIC Design for Capacitive Accelerometer Development
- Y. Jiang, D. Wang and P. K. Chan. (2019). A Quiescent 407 nA Output-Capacitorless Low Dropout Regulator with 0-100 mA Load Current Range. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, .
- K.C. Koay and P.K. Chan. (2018). A 0.18um CMOS Voltage-to-Frequency Converter with Low Circuit Sensitivity. IEEE Sensors Journal , 18(15), 6245-6253.
- F. Xiao and P.K. Chan. (2017). A Performance-Aware Low-Quiescent Headphone Amplifier in 65nm CMOS. IEEE Journal of Solid-State Circuits, 52(2), 505-516.
- X.L. Tan, S.S. Chong, P. K. Chan and U. Dasgupta. (2014). A LDO Regulator with Weighted Current Feedback Technique for 0.47nF – 10nF Capacitive Load. IEEE Journal of Solid-State Circuits, 49(11), 2658-2672.
- S.S. Chong and P. K. Chan. (2012). Cross Feedforward Cascode Compensation for Low-Power Three-Stage Amplifier with Large Capacitive Load. IEEE Journal of Solid-State Circuits, 47(9), 2227-2234.
« Back to Category Write-up